SINE WAVE INVERTER

SINE WAVE INVERTER

INTRODUCTION

Power inverter is a device that converts electrical power from DC form to AC form using electronic circuit. It’s typical application is to convert battery voltage into conventional household AC voltage allowing you to use electronic devices when an AC power is not available. This set of inverter produces sine wave at the output and gives number of advantages as well as features.

Sr. No. Parameter Specification
1. AC Input
  Rating 800 VA / 1400 VA / 2 KVA / 3 KVA
  Voltage 230V +20% to 30%
  Frequency 50 Hz ±10%
  Phase Single Phase
2. DC Voltage
  Battery Voltage 12 V, 24V, 24/36/48V, 36/48V
  Charging Current 10 Amp
  Charger Type SMPS
3. Inverter
  Technology MOSFET
  Output Voltage 230 VAC, Single Phase
  Voltage Regulation ±2%
  Frequency 50 Hz ±0.5 Hz
  Waveform PWM Sine Wave
  Harmonic Distortion Less Than 3% (no load to full load)
  Inverter Efficiency >85%
  Power Factor >0.8
  Overload >150% for 30 Sec
  Audible Noise >Less than 45 dB at 1 Meter
4. Indications
  Mains On, Inverter On, Battery Low, Overload, Charging On/LCD Optional
5. General
  Dimensions (L x W x H) in mm >350 x 350 x 180, 400 X 300 X 400
  Operating Temperature >0°C to 50°C
  Humidity >Max 95%, Non Condensing
6. Protections
6. Output Overload & Short Circuit, Output Overvoltage, Battery Deep discharge
7. Changeover
  Electromechanical S/w Provided as Standard Featur

Clients